Besmak 100 kN Servo-Hydraulic Dynamic Fatigue Test Machine

Main Features Test System: : Maximum Load Capacity : 100 kN Frame Type : Rigid frame in Column construction. Electronic Unit : New generation EDC Electronic Control Unit Data Acquisition and control system : 10 kHz (10000 data/sec) Control 1) Servo Hydraulic 2) EDC Controller 3) Universal Testing Software Accuracy : ± 0,5% Load Measuring : Class 0.5 Resolution : 24 bit Displacement Resolution : 0.001 mm Vertical Test Area : 1000 mm without accessoried Horizontal Test Area : 550 mm (Horizontal Daylight) Software : Universal Testing Software Power requirement : 3 phase; 380 Volt, 50/60 Hz Ambient Operating Temperature : 0℃～40℃, Moisture 10% - 90% Actuator Stroke : 150 mm - Hydrostatic double acting actuator - With a resistant to at least 1 G of acceleration, - Fixed Cross-head - A hydraulic control unit equipped with a servo valve, - Complete with electronic control unit - Complete with air cooled heat exchanger system Frame: Test system consists of a double-column fixed cross-head type rigid frame Test frame is feasible for 100kN capacity dynamic tests. Load Measurement and Control: - feasible to carrying out load controlled test with class 1 according to EN 7500-1 standard Load control resolution : 20 bit Load cell calibration : can be carried out between 2% to 100% of maximum capacity - Special EEprom plug with Self-recognition system for Load cell Displacement Measurement and Control: - a MTS brand SSI type non-contact electromagnetic linear displacement sensor - 1 micron measurement and control resolution. - Displacement sensor has very fast response can work up to 1 m/sec Electronic Control Unit: - Test system comes with a special closed-loop controlled electronic control unit. Data acquisition speed : 10000 samples per second Accurate synchronization : will be done/controlled by advanced PID or close loop configuration Channels : 5 channels (2 internal, 3 external). Handheld Unit: - Test system comes with one remote control unit RMCi Series Handheld with smart key - Movement and speed can be controlled easily, precisely, accurately and safely. Test Software : Advanced dynamic test software. Hydraulic Power Unit : Advanced hydraulic Power Unit (15 l/min flow rate) Appropriate Ambiance Temperature : 0℃～40℃, Moisture 10% - 90% Power : 380 V, 50Hz